How We Sew Your Custom Suit Bag
Six steps stand between a roll of fabric and a bag that carries your brand. Machines handle speed — our most experienced hands handle the details that matter.
Six craft steps, one standard
Every Stolora order passes the same line — cutting, printing, sewing, binding, hardware and a final quality bench that has run in our family since 1984.
Cutting
Fabric is laid, pattern-matched and cut square — straight grain keeps the bag draping right and the logo sitting level. Every panel is measured against the spec sheet, not by eye.
Printing & Labels
Screen print, embroidery, woven labels, heat transfer and hang tags — each method matched to your fabric and order volume so the logo stays sharp after years of use.
Sewing
Machine stitching for strength, hand finishing for detail. Seam tension is set per fabric so seams lie flat — no puckering, no skipped stitches on long runs.
Binding & Zippers
Edge binding protects the seams that take the most abuse; zippers are aligned and tested for smooth travel. This is where a cheap bag starts to feel different.
Hardware Fitting
Hanger openings are reinforced, hooks anchored, handles bar-tacked at stress points. Hardware is fitted so it lasts the life of the bag — not the first season.
Quality Control
Every bag is turned inside out, zipper run, labels checked, stitches inspected — at a bench, by hand, before packing. The bench is the last thing between your brand and your customer.